Some home garages and workshops might not have the headroom or expendable space for a 2 post lift*. They are popular in home garages, detailing shops, tyre bays, workshops and body shops.

Presently we have 4 Mid-Rise Scissor lifts in our range. They are all portable and have a range of lifting capacities 3 Ton, 3.5 Ton and 4 Ton.

3 out of our 4  Mid-Rise Scissor lifts have open centre design allowing full access.

There are several locking positions and a movable limit switch on the platform style Mid-Rise Scissor lifts.

Our present range of Mid-Rise Scissor lifts do not need a separate air supply.

Our Mid-Rise Scissor platform lifts have this design. It is also known as a ‘Kicker’ plate.

It allows the lift to start lifting from a very low height. Ideal for low ride height cars and they are a favourite with detailing shops, as they work on a high percentage of sports cars.

At a low height there is no mechanical lifting force as the hydraulic rams are in a horizontal  position. So the lifting plate compensates by pivoting and acts as a booster rocket.  In short the lifting plate feature makes the lift stronger from a collapsed position.

Yes, you can lock the run up rams in an horizontal position to extend the platforms and they are load bearing

In most situations there is no need to fix the lift to the ground. However, if you have a tiled/shinny floor you may incur slipping and you will need to either fix it to the ground or use rubber mating or run up ramps, which we can supply.

These lifts are 1 phase 220v, but you need a 20amp supply on a ‘C’ or ‘D’ breaker. We have a bulletin on this subject, which you can request.  So, they cannot be used with a 13amp plug.

Yes, a mobile kit is included.

It uses 32 grade hydraulic oil. They  need 2 x 5lts. Our part number is E4G 3205.